Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Icemaker overfills
Options
Go to last post Go to first unread
Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
davebloyd  
#1 Posted : Friday, June 12, 2009 8:19:43 AM(UTC)
davebloyd

Rank: Member

Groups: Registered
Joined: 6/12/2009(UTC)
Posts: 2
Icemaker in Kenmore top freezer marked S 106 626636 has 1 gear that says " do not rotate manually". I have replaced the water valve & it still overfills the tray. Water runs for about 20 seonds. I pulled off the control head & everthing looks good. It rotates thru the cycle, but should only open the valve for 6-8 seconds. What could be wrong? Does the motor get slow & make the valve stay open for too long? Can I replace just the motor?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Friday, June 12, 2009 1:09:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
There is suppose to be a water level adjustment screw on the right side of the head or on top ofthe head face. Turn this screw a half turn CW to decrease the water level.

If it would not help then the ice maker has to be replaced. Replacement of just ice maker parts has very low rate of success.

- The part number for the ice maker is AP2984633

Gene.
Back to top
davebloyd  
#3 Posted : Saturday, June 13, 2009 6:53:18 AM(UTC)
davebloyd

Rank: Member

Groups: Registered
Joined: 6/12/2009(UTC)
Posts: 2
I have already tried the adjustment w/ no luck. Thanks for that part number, I was having trouble finding it.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Icemaker overfills (Refrigerator & Freezer Repair)
by elmermax 2/15/2011 5:32:30 AM(UTC)
GE Icemaker Overfills just a little bit (Refrigerator & Freezer Repair)
by rmcardam 3/12/2008 5:27:48 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET