Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
8 Pages<12345>»
Refrigerator Defrost Problems
Options
Go to last post Go to first unread
Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
Zig  
#21 Posted : Tuesday, May 5, 2009 3:24:23 PM(UTC)
Zig

Rank: Member

Groups: Registered
Joined: 3/8/2009(UTC)
Posts: 19
Did just that. The defrost heater came on - amber glo and water dripping. This is exactly the same as before I replaced the main board. Does this mean the new board broke in 2 months?
Back to top
richappy  
#22 Posted : Wednesday, May 6, 2009 2:02:20 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would try replacing both freezer thermistors after defrosting the freezer. If that will not solve the problem, replace the motherboard and add a 1000 joule surge protector to the wall outlet. Surge protector available at Lowes, specifically made for appliances $ 12.99 in a blue box.
Back to top
Zig  
#23 Posted : Wednesday, May 6, 2009 7:01:00 AM(UTC)
Zig

Rank: Member

Groups: Registered
Joined: 3/8/2009(UTC)
Posts: 19
Just so I order the right parts, you said replace both the freezer thermistors. According to the diagram, there is a evaporator thermistor and a freezer thermistor. Are you referring to these two? When I tried to look up the parts, there is only one "sensor" Sensor temp ff Part Number: AP3185407 made by GE(Replacement parts for GE GSS25JFMBWW | AppliancePartsPros.com. There is no thermistor. Should I just order two of these "sensors"? Thanks.
P.S. should I even bother to test the thermistors before replace them? Is the replacement going to be cut and reconnect?
Back to top
richappy  
#24 Posted : Wednesday, May 6, 2009 8:21:58 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I believe both thermistors are the same. You just clip the wires and splice the new ones in with inline wire splices.
Back to top
Zig  
#25 Posted : Sunday, May 10, 2009 9:45:44 AM(UTC)
Zig

Rank: Member

Groups: Registered
Joined: 3/8/2009(UTC)
Posts: 19
Replaced both thermistors today. Keeping my fingers crossed. Usually takes a couple of months for the frost to build up. Will keep you posted. Is there a quicker way to check if everything is ok now? Thanks.
Back to top
richappy  
#26 Posted : Sunday, May 10, 2009 3:41:45 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
No way really to check for incomplete defrost. If defrost period is too short, frost will gradually build up on the sides of the evaporator.
Back to top
Zig  
#27 Posted : Monday, May 11, 2009 9:16:33 AM(UTC)
Zig

Rank: Member

Groups: Registered
Joined: 3/8/2009(UTC)
Posts: 19
I did check the continuity of the thermistors. The one on the evaporator showed zero rhom. The one at the bottom of the freezer had 3-4K. The two new ones both had 3-4k. All at room temp. Does this mean the one on the evaporator was bad? Really hope this will fix it.
Back to top
richappy  
#28 Posted : Tuesday, May 12, 2009 2:08:05 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Seems that one of them is bad, just replace both and see what happens.
Back to top
jmann1  
#29 Posted : Monday, January 31, 2011 2:55:36 PM(UTC)
jmann1

Rank: Member

Groups: Registered
Joined: 1/30/2011(UTC)
Posts: 16
I realize this is an old thread, but hopefully someone will see it.
I also have a GSS25JFMBWW.

About two months ago I replaced the defrost heater (AP3183311) and thermostat (AP3884317).

I noticed that the fan in the freezer was running almost constantly for a few days and the frost was starting to build up on the back of th freezer.

Following the advice in this thread, I jumped the heater wires and the heater worked normally. I defrosted the freezer and noticed that when I plugged it back in, the freezer fan came on immediately.

I assume this shouldn't happen until the evap is cold enough?

Any ideas which parts I should throw at this based on what I have described?

UPDATE: I pulled the control board out to look for the bad solder issues and found a burned solder joint on the defrost relay. I resoldered it and waiting to see if the defroster comes on automatically. After reassembling, the freezer fan kicked on immediately and continues to run.
I'm not sure if this is normal or not.

Back to top
Gene  
#30 Posted : Monday, January 31, 2011 5:43:23 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Very likely you fixed the defrost problem by re-soldering that joint.

Both the evaporator and the condenser fans should run as long as the compressor is running.

Gene.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Refrigerator defrost problems (Refrigerator & Freezer Repair)
by Bonadu 7/1/2013 11:46:54 AM(UTC)
8 Pages<12345>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET