Timer will not advance in Auto Dry - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Timer will not advance in Auto Dry Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: PYE2300AYW	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

KSherer		#1 Posted : Tuesday, June 2, 2009 6:17:52 PM(UTC)
Rank: Member Groups: Registered Joined: 6/2/2009(UTC) Posts: 1		My dryer will run in timed drying but will not advance in auto dry


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, June 3, 2009 12:54:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts, includes a wiring diagram Replacement parts for MAYTAG PYE2300AYW \| AppliancePartsPros.com In Auto modes the timer gets power when the heater shuts off. Try an air only cycle if it still does not advance and you have some heat you probably have a grounded element. To confirm remove both wires from the heating element, measure it for continuity (should be 10 ohms approx.) and then measure each input to the frame (should be infinite) Remember to unplug the unit before working on it!!! If not infinite coil may have sagged or broken and is touching the case. Could also be the resistor. The above are the most common but there are other possible causes.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close