Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jlab3953  
#1 Posted : Sunday, December 16, 2007 11:17:54 AM(UTC)
jlab3953

Rank: Member

Groups: Registered
Joined: 12/16/2007(UTC)
Posts: 2

I have a Kenmore washer that agitates weakly and at the same speed regardless of what speed I set it on. It also spins slowly. Do you think that it may have a bad coupling or a bad transmission? Thanks in advance for your help!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, December 17, 2007 10:52:28 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first thing I would check is the speed resistance at the motor.
It suppose to be:
the low speed winding across W-BK and W-OR - 2.6 Ohms,
the medium speed winding across W-BK and W-V - 1.5 Ohms,
the high speed winding across W-BK and BU - 2.3 Ohms,
the start winding across Y and BK-Y 5.1 Ohms.

Post your findings, please.

Gene.
jlab3953  
#3 Posted : Wednesday, December 19, 2007 5:07:56 PM(UTC)
jlab3953

Rank: Member

Groups: Registered
Joined: 12/16/2007(UTC)
Posts: 2

Hi Gene!

Sorry that I didn't reply earlier. Thank you for your response.

Before I checked the resistance on the motor I filled the tub again to see how the washer would agitate. It agitated fine and at different speeds when I changed the speed setting. So I washed two loads last night and a load now and everything seems fine. I did nothing and checked nothing. Is this common for a motor to act up and then run nornal? I'll look forward to your response.

jlab3953
richappy  
#4 Posted : Wednesday, December 19, 2007 6:42:44 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Your timer or speed control is sometimes applying power to both high and low speed windings in the motor. For intermittants, most probably the timer. Just check next time it acts up. On second thought, if both agitate and spin where bad, it's your speed control switch, check per schematic.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.