Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Steinmy  
#1 Posted : Monday, June 1, 2009 6:01:05 AM(UTC)
Steinmy

Rank: Member

Groups: Registered
Joined: 6/1/2009(UTC)
Posts: 1

The door to our dishwasher was slammed very hard. Since then, it just keeps running and running on the wash cycle. Any suggestions as to what parts we may need? Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Monday, June 1, 2009 6:50:37 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Was thanked: 10 time(s) in 10 post(s)
Here are your parts
36316222100
Note unforetunately it does not show the timer so I am assuming it is the mechanical type

Looks like it is actually a GE.
Remove the door's inner cover and take a look, could be just a wire has come loose.
I assume the unit fills and starts washing.
If the dial does not advance at all perhaps the wire to the timer motor is loose or off.
Can you get it to drain etc. by manually moving the dial?
If it will drain does it then advance and complete the cycle?
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.