Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



New Topic Post Reply
Go to last post Go to first unread
#1 Posted : Monday, July 30, 2007 5:33:26 PM(UTC)

Rank: Member

Groups: Registered
Joined: 7/30/2007(UTC)
Posts: 1

Thermador oven controls worked fine for the first 5 years but in the last 6 months the Bosch control unit has been fried and replaced 3 times. While it is easy to replace these units it is a costly exchange at $200 a pop. Appliance parts pros have been helpful and replaced a unit (part #ap2836528) under a warrentee. What in the stove is causing these units to short out within two months of being replaced? Any help would be greatly appreciated.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Admin / APP Team  
#2 Posted : Tuesday, July 31, 2007 3:36:56 PM(UTC)
Admin / APP Team

Rank: Administration

Joined: 7/18/2007(UTC)
Posts: 799

Was thanked: 1 time(s) in 1 post(s)
I don't see any bulletins from Bosch re: this problem. I'd try using a surge protector and see if it helps. This is very unusual and it's extremely unlikely to get a defective board, not to mention 3 in a row. This is a pretty common control board for Thermador ranges and we don't see too many warranty claims or returns for it. I'd try the surge protector first.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.