kenmore/whirlpool spins slowly. - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

kenmore/whirlpool spins slowly. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: C1104430081	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

scirocco90		#1 Posted : Tuesday, December 11, 2007 7:39:36 AM(UTC)
Rank: Member Groups: Registered Joined: 12/11/2007(UTC) Posts: 2		My old washer won't spin fast enough to dry the clothes. There are oil drops on all the lower parts of the transmission. The solenoid seems to work. I was able to spin it freely by hand, but it slows back down to a slow spin. The set screw seems to be tight. Has the transmission gone, or just a seal? :confused:


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Tuesday, December 11, 2007 2:59:13 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		In order to provide the most accurate advise I need the complete model number of the washer. The number you posted is the serial number. Would it stop spinning if you hold the basket? Gene.


User Profile View All Posts by User View Thanks

scirocco90		#3 Posted : Tuesday, December 11, 2007 4:28:25 PM(UTC)
Rank: Member Groups: Registered Joined: 12/11/2007(UTC) Posts: 2		it says model #C1104430081 there is a small space between the 0 and the 4 and the 4430081 is a little smaller. Serial #AC 22147. This is a Canadian washer. The C might denote Canada? It was made by Whirlpool for Kenmore. Yes the basket stops if I hold it.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, December 11, 2007 4:53:18 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a bad transmission. Unfortunately the APP does not ship parts to Canada. Gene.


User Profile View All Posts by User View Thanks

abbie		#5 Posted : Tuesday, December 11, 2007 5:07:45 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 11/15/2007(UTC) Posts: 189		make sure the belt is tight,make sure that the set screw is flush with the outer part.If so then look under and see the spring that holds the clutch plate down, remove the spring and take out a spacer[washer] then replace the spring and then check the spin.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close