Rank: Member
Groups: Registered
Joined: 11/7/2011(UTC)
Posts: 1
|
Hi my mother in law has a Tappan gas range that says F31 in the digital read out and the oven wont work now could you please help and tell me what that code means cause we cant find out anywhere.
Thanks Stephanie
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Stephanie, The "F31" error code means "oven temperature probe (aka a sensor) shorted". This probe has to be checked for continuity. The normal resistance reading at the room temperature should be about 1100 Ohms. The range has to be pulled out of the wall and the rear panel has to be removed to access the plugs and wires. If the reading is wrong, replace the probe. If the reading is correct, check the wires between the probe and the control board, including all plugs. If there is nothing wrong, replace the control board (aka a clock). It is recommended by the manufacturer to replace the overlay together with clock because it is glued on. - The probe/sensor Part number: AP4433173
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
