Kenmore washer tub repair - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Kenmore washer tub repair Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

Dougwjackson		#1 Posted : Monday, October 31, 2011 3:16:53 PM(UTC)
Rank: Member Groups: Registered Joined: 10/31/2011(UTC) Posts: 1		I found that a penny had been launched into the plastic tub of the washer and caused a hole, leaking profusely. I took the tub out and separated the halves, and want to know if the plastic is repairable with fiberglass or perhaps with a PVC glue and plug. The hole is actually the thickness of a penny and almost as wide, so it is a slit. I figured I could repair this, but I am unsure of the type of plastic and if fiberglass or epoxy will stick permanently to it. Any ideas? Thanks, Doug


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, November 2, 2011 6:04:46 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I don't know. I would try a good two part epoxy, which I think will work. Good luck, let us know how it turns out.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close