Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Error "CE"
Options
Go to last post Go to first unread
Model: 110.22082102 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
Chas Dino  
#1 Posted : Friday, May 8, 2009 9:12:12 AM(UTC)
Chas Dino

Rank: Member

Groups: Registered
Joined: 5/8/2009(UTC)
Posts: 2
Error "CE". Motor control board has blown 12amp fuse. What caused the failure, not sure. Jumpered new fuse in but will not run drain pump or start motor. Jumpered drain pump with 120 volts and runs fine. Jumpered main motor but can not get to start. how to verify motor is good before ordering new control board @ $200.00?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Friday, May 8, 2009 7:38:18 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Chas Dino,

You can find the troubleshooting instructions in the Service manual.

Post the results and we'll help you with the correct part number(s).

Gene.
Back to top
Chas Dino  
#3 Posted : Saturday, May 9, 2009 1:21:37 AM(UTC)
Chas Dino

Rank: Member

Groups: Registered
Joined: 5/8/2009(UTC)
Posts: 2
:) Gene, Thanks for the link to the Job Aid service manual. Looked up troubleshooting and have done all the steps listed. Checked ohm readings on both drive and pump motors. They are within specs and I am pretty sure the motor control bd is main prob. I have a new bd ordered. But, still would like to bench test the drive motor out of the washer. Do you have any suggestion?
Originally Posted by: Chas Dino Go to Quoted Post
Error "CE". Motor control board has blown 12amp fuse. What caused the failure, not sure. Jumpered new fuse in but will not run drain pump or start motor. Jumpered drain pump with 120 volts and runs fine. Jumpered main motor but can not get to start. how to verify motor is good before ordering new control board @ $200.00?
Back to top
Gene  
#4 Posted : Saturday, May 9, 2009 2:01:44 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
No, I do not.

Gene.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
calypso error "CE" (Washer Repair)
by dan edmunds 8/7/2007 7:55:54 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET