Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
TWISTEDKEVIN  
#1 Posted : Wednesday, December 5, 2007 3:30:59 PM(UTC)
Quote
TWISTEDKEVIN

Rank: Member

Groups: Registered
Joined: 12/5/2007(UTC)
Posts: 4

My agitator only works when I fill the washer to a large wash load. If I fill it to a super load the bearings or something get wet and the top slips. I want to buy a new agitator, but I cant figure out how to get the old one out. Can anyone help me out with this problem? GE PROFILE MODEL# WPSR3100W2WW

Thank you,

TWISTEDKEVIN
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, December 5, 2007 4:25:09 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the dispenser assembly from the agitator and unscrew the bolt holding the agitator (#301 on the tub and agitator break down diagram).

The problem could be a worn out agitator coupling (#310 on the same break down diagram).

- The part number for the agitator coupling AP3964635

- Here are the break down diagrams for the GE washer Model WPSR3100W2WW

Gene.
TWISTEDKEVIN  
#3 Posted : Wednesday, December 5, 2007 5:17:54 PM(UTC)
Quote
TWISTEDKEVIN

Rank: Member

Groups: Registered
Joined: 12/5/2007(UTC)
Posts: 4

Thank you for your time Gene, But the agitator coupling seems to be working great. It's the top of the agitator that slips and does not go round & round, it just goes back & forth, if I fill it to high. I removed the dispenser and saw no nut, It's a sealed part. The agitator has to be removed in order to get to the bolt you talked about. I to thought it should be that easy! It's NEVER that easy is it? Could it just pull up and out?
Thank you,
TWISTEDKEVIN
Gene  
#4 Posted : Wednesday, December 5, 2007 5:22:44 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
In that case you just have to pull it up. It could be Very Hard!

Gene.
TWISTEDKEVIN  
#5 Posted : Wednesday, December 5, 2007 5:26:08 PM(UTC)
Quote
TWISTEDKEVIN

Rank: Member

Groups: Registered
Joined: 12/5/2007(UTC)
Posts: 4

Do I just use my hands?
Gene  
#6 Posted : Wednesday, December 5, 2007 5:34:06 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
It use to be a special tool, called "Agitamer". I'm afraid it's no longer available.

Gene.
TWISTEDKEVIN  
#7 Posted : Wednesday, December 5, 2007 5:42:25 PM(UTC)
Quote
TWISTEDKEVIN

Rank: Member

Groups: Registered
Joined: 12/5/2007(UTC)
Posts: 4

Thank you again for your time, I think I'll order the part and see what it looks like and try to get it out. If it works I'll let you know how I did it, maybe I'll use a tool called pounditout. Wish me luck!!

From cold Cleveland Ohio
TWISTEDKEVIN
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
how do i remove the agitator from the tub (Washer Repair)
by gaylynn 4/8/2009 9:51:20 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.