Do I need the relay as well? - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Do I need the relay as well? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU927QWDQ1	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

wannafixwhatsbroke		#1 Posted : Wednesday, October 12, 2011 1:22:25 PM(UTC)
Rank: Member Groups: Registered Joined: 10/12/2011(UTC) Posts: 3		I want to replace the pump assembly for my DU927QWDQ1 dishwasher. I see I need part AP5305918 and the gasket AP2908993. In the "product question" section after the order page it says "the manufacturer also recommends replacing the relay". But how do I know what relay that is? Is there a typical relay that would need to be changed when replacing the pump assembly? Thank you - Mike


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Thursday, October 13, 2011 5:15:26 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here is the parts breakdown Replacement parts for WHIRLPOOL DU927QWDQ1 UNDERCOUNTER DISHWASHER \| AppliancePartsPros.com I could not find a relay. Also when I did a Search By Keyword a relay did not come up. So I went looking for a wiring diagram. I could not find a DQ1 but did find a DQ0 which should be a close match (see the attachment) again I do not see a relay so I am stumped perhaps that Question is for a different model. I would check with the parts people. File Attachment(s): DU927.pdf (1,471kb) downloaded 4 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

wannafixwhatsbroke		#3 Posted : Thursday, October 13, 2011 7:24:33 AM(UTC)
Rank: Member Groups: Registered Joined: 10/12/2011(UTC) Posts: 3		Thank you, very helpful! Do you know if I will have to remove the dishwasher from under the counter to replace the pump assembly or does it go in from the top? Mike


User Profile View All Posts by User View Thanks

denman		#4 Posted : Thursday, October 13, 2011 1:46:45 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		The following should help http://appliancedigest.c...ishwasher-service-manual and http://appliancedigest.c...er-module-service-manual You have to join the site to download the manual but it is free and this is a very good site for manuals and other info for the appliance repair DIYer. May be easier and quicker to pull the unit depends how good you are at lying on the floor and reaching in disconnecting/reconnecting things. Be sure that the power is off!!!
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close