Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
fred2117  
#1 Posted : Thursday, April 30, 2009 2:09:57 AM(UTC)
fred2117

Rank: Member

Groups: Registered
Joined: 12/8/2008(UTC)
Posts: 4

My dreyer is not drying clothes,And it also won't shut down in auto cycle.. No blockage in exhaust,Although I did not check deep internal ducting, I see the heat come on for a minute or two once in a while. What is the solution and is relatively simple?? Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kayakcrzy  
#2 Posted : Thursday, April 30, 2009 4:21:44 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

That model # is not coming up. But if it is a gas dryer, it definetly sounds like the coils on the gas valve are bad. The secondary coil is not kicking in. Easy repair, and a cheap repair. Tom ApplianceEducator.com
ofuel  
#3 Posted : Thursday, April 30, 2009 10:40:58 AM(UTC)
ofuel

Rank: Member

Groups: Registered
Joined: 4/30/2009(UTC)
Posts: 2

My dryer has this model number: 417.90042990. It also says... Gas input 20.000 BTU / hr,

What is the possible part I need to replace. Suddenly stopped heating up last day or so. Not sure exactly when. Wife claims to have heard a sound that didn't sound right... sounds normal now... but no heat.
Gene  
#4 Posted : Thursday, April 30, 2009 1:09:17 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
ofuel,

You have to have a simple multimeter to perform the troubleshooting. Let us know when you are ready.

Gene.
ofuel  
#5 Posted : Thursday, April 30, 2009 3:59:44 PM(UTC)
ofuel

Rank: Member

Groups: Registered
Joined: 4/30/2009(UTC)
Posts: 2

Originally Posted by: Gene Go to Quoted Post
ofuel,

You have to have a simple multimeter to perform the troubleshooting. Let us know when you are ready.

Gene.


These are pictures of a part I think might be the culprit. I was making some rattling noise when I pulled it off. The three wires (two are on the same terminal) ... should they be connected together to test, or left un-connected?

It looks to be a heat switch. (when it gets over a certain temp, it either connects the circuit or breaks it. (do you know which is supposed to do?)

Also... Is it worth trying to fix this dryer if it's 10 years old, and we can replace it with one that works for $75 bucks on craigs list?

UserPostedImage

UserPostedImage

UserPostedImage
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.