GE Profile QPIII - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE Profile QPIII Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSD4330Z04WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

kevlar		#1 Posted : Monday, December 3, 2007 4:10:52 PM(UTC)
Rank: Member Groups: Registered Joined: 12/3/2007(UTC) Posts: 2		I never get the dishwasher to drain , the bottom is always full I checked hoses and they are not plugged , I changed the Drain Solenoid and it still is not draining . Is there something I am missing? Is ther a impeller somewhere??


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

ripleys		#2 Posted : Monday, December 3, 2007 4:29:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 79		Check inside the dishwasher at the back of the tub, there should be a long filter with 4 1/4 head screws. Remove that filter and it will expose a piston/nut assembly. It will unscrew counter clockwise with a pair of needle nose pliers. You may find that there is a rubber plunger type of material that has disintagrated over time and that piston/nut will need to be replaced as that causes a slow to no drain situation when faulty. Hope this helps.


User Profile View All Posts by User View Thanks

kevlar		#3 Posted : Monday, December 3, 2007 4:46:17 PM(UTC)
Rank: Member Groups: Registered Joined: 12/3/2007(UTC) Posts: 2		Hey i just took out the filter and got the piston part out it seems like it works but i see no reubber parts i mena the spring is fine and there is some white residue i assume that is the rubber but if it is open does that not drain or does it use a vacuum type reaction . anyway where can i get the part? thanks


User Profile View All Posts by User View Thanks

ripleys		#4 Posted : Monday, December 3, 2007 4:49:41 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 79		That white residue is what's left of the rubber seal which is part of the piston/nut. Replace that part and it should drain 100%.


User Profile View All Posts by User View Thanks

ripleys		#5 Posted : Monday, December 3, 2007 4:54:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 79		The part # is WD24X10018. The part costs no more than 10.00 canadian. Any appliance part dealer will be able to help you.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close