Whirlpool Duet Dryer and Error Code F70 - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool Duet Dryer and Error Code F70 Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

bustdwhrpl		#1 Posted : Thursday, October 6, 2011 5:55:34 PM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2011(UTC) Posts: 1		Replaced vent hose (and cleaned lint out of inside and exterior vent area) and since then dryer keeps shutting off almost immediately after turning it on. It shows Error Code F70. Dryer seems to have plenty of heat. Have unplugged it several times. Gotten a couple of loads dry in past week, but usually won't run more than a couple of minutes. Took top off and re plugged in connections. With top off 2 loads dried, then put top back on and quit working again - noticed moist hot air in dryer (outside of drum unit) when took cover off again. Model #WED9200SQ0


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

scotchwhiskey		#2 Posted : Saturday, March 1, 2014 9:49:57 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2014(UTC) Posts: 4		Originally Posted by: bustdwhrpl Replaced vent hose (and cleaned lint out of inside and exterior vent area) and since then dryer keeps shutting off almost immediately after turning it on. It shows Error Code F70. Dryer seems to have plenty of heat. Have unplugged it several times. Gotten a couple of loads dry in past week, but usually won't run more than a couple of minutes. Took top off and re plugged in connections. With top off 2 loads dried, then put top back on and quit working again - noticed moist hot air in dryer (outside of drum unit) when took cover off again. Model #WED9200SQ0 Any answers to this question?


User Profile View All Posts by User View Thanks

markonah		#3 Posted : Sunday, March 2, 2014 6:38:07 AM(UTC)
Rank: Member Groups: Registered Joined: 2/27/2014(UTC) Posts: 7		Originally Posted by: scotchwhiskey Any answers to this question? Not yet, may someone else


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close