Hey Guys.

I searched Google and found this thread.

Same issue for me. WFR2460 would just make a humming noise and the drum would not rotate. After looking at the service manual (here http://www.cagrimmett.com/justanswer/boschwasher.pdf) I ran a test on the motor and it failed. This and other threads almost unanimously said the brushes would be the issue.

I pulled the motor out with very basic tools: hex head screw driver and 11 MM socket. A quick pry got the motor out. I found this YouTube video (here How to replace and fit washing machine carbon brushes on Bosch. - YouTube) and pulled the old warn brushed out. Gave them a "tap" on the table to clear the dust, and reinserted into the motor. I put the motor back in the washer and it fired back up error free!

While I realize this likely bought me only a short amount of time, I ordered the new brushes from this website. It should only be about 30 more minutes to install new ones once they arrive after my experience.

I'm stoked I dont have to go out and spend $2k on a new washer and dryer as my Axxis were stack unit.

Thanks all!