Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Will not spin during spin cycle
Options
Go to last post Go to first unread
Model: LNC6747A71 Brand: Admiral Age: 5 - 10 years
Previous Topic Next Topic
jack_flash_ji  
#1 Posted : Monday, December 3, 2007 6:11:13 AM(UTC)
jack_flash_ji

Rank: Member

Groups: Registered
Joined: 12/3/2007(UTC)
Posts: 2
I have an Admiral washer that will not spin...
When I set it to normal wash and it reaches the spin cycle, it does not spin. There is no loud noise... The timer is still ticking.... All cycles work fine... it agitates, drains, fills, etc.... just doesn't spin...

I can set it to other spin cycles on the dial and they work just fine
(spin cycle for permanent press, extra rinse, delicate)

Any help would be appreciated.....
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, December 3, 2007 9:16:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem with your washer is a bad timer.

The model number you posted does not come up and I'm not able to give you the right part number for the new timer.

Please, verify the model number or find the part number from the old timer and post it.

Gene.
Back to top
jack_flash_ji  
#3 Posted : Wednesday, December 5, 2007 6:21:25 AM(UTC)
jack_flash_ji

Rank: Member

Groups: Registered
Joined: 12/3/2007(UTC)
Posts: 2
The model number is correct....
Will have to pull apart the washing machine tonight to get the number off the timer.
Back to top
bamadadof2  
#4 Posted : Tuesday, January 1, 2008 5:53:48 AM(UTC)
bamadadof2

Rank: Member

Groups: Registered
Joined: 12/31/2007(UTC)
Posts: 4
had admiral washer that had similar problem. had leak in hose from tub to pump. leaking water on floor & not draining. when it would finally drain, would not spin. service guy said had leak in hose from tub to pump. when water leaked onto floor also leaked onto hose. the hose would slip & not work properly. when hose replaced (10.00) worked fine in draining tub & spinning. check that out....
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Washer will not spin during spin cycle (Washer Repair)
by Nathaniel 1/27/2008 2:26:56 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET