Putting back together glass door Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KGRT507BWH3	Brand: Kitchen Aid	Age: More than 10 years
Previous Topic Next Topic

Teresa Martin		#1 Posted : Sunday, April 19, 2009 4:54:22 PM(UTC)
Rank: Member Groups: Registered Joined: 4/19/2009(UTC) Posts: 6		I have my door off to clean. I took it all apart but I am having problems with two metal pieces. One screws into the top of another and I think goes in either of the lower corners inbetween the glass in the hindge area. I can't find a good enough picture to tell how or where it fits in.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Teresa Martin		#2 Posted : Sunday, April 19, 2009 4:57:45 PM(UTC)
Rank: Member Groups: Registered Joined: 4/19/2009(UTC) Posts: 6		Originally Posted by: Teresa Martin I have my door off to clean. I took it all apart but I am having problems with two metal pieces. One screws into the top of another and I think goes in either of the lower corners inbetween the glass in the hindge area. I can't find a good enough picture to tell how or where it fits in. I can't use the oven without the door.
User Profile View All Posts by User View Thanks

woodchuckie		#3 Posted : Sunday, April 19, 2009 6:51:33 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/10/2009(UTC) Posts: 1,363		Have you seen the diagram here. http://www.appliancepartspros.com/sect/m/3/r/m3r634xijj.gif
User Profile View All Posts by User View Thanks

Teresa Martin		#4 Posted : Monday, April 20, 2009 9:31:40 PM(UTC)
Rank: Member Groups: Registered Joined: 4/19/2009(UTC) Posts: 6		:) Thank you for your hot tip. I have looked at that diagram till I am blue in the face. I have several copies of it. I think it might be piece #26. I have had a whole day away from it. I will try again. Thanks
User Profile View All Posts by User View Thanks

denman		#5 Posted : Tuesday, April 21, 2009 3:28:36 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Perhaps this will help https://secured.whirlpoo...68baf/$FILE/GASRANGE.pdf Not sure but I think 26 is the magnetic latch for the drawer.
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

Teresa Martin		#6 Posted : Tuesday, April 21, 2009 10:27:41 PM(UTC)
Rank: Member Groups: Registered Joined: 4/19/2009(UTC) Posts: 6		;) Originally Posted by: den man Perhaps this will help https://secured.whirlpoo...68baf/$FILE/GASRANGE.pdf Not sure but I think 26 is the magnetic latch for the drawer. There is hope for me, my computer and my well taken care of kitchen Aid. Thank you so much for all the information. I am speech less. I spent another hour wondering why, why did I have to go the extra mile to strip down the whole door just so I could see what I was cooking. I will pick it up again tomorrow, day six.
User Profile View All Posts by User View Thanks

Teresa Martin		#7 Posted : Tuesday, April 21, 2009 10:34:46 PM(UTC)
Rank: Member Groups: Registered Joined: 4/19/2009(UTC) Posts: 6		Originally Posted by: Teresa Martin ;) There is hope for me, my computer and my well taken care of kitchen Aid. Thank you so much for all the information. I am speech less. I spent another hour wondering why, why did I have to go the extra mile to strip down the whole door just so I could see what I was cooking. I will pick it up again tomorrow, day six. I was concentrating on the wrong end of the hinge. I think the parts are the retainer brackets. Thanks:D
User Profile View All Posts by User View Thanks

Teresa Martin		#8 Posted : Wednesday, April 22, 2009 7:15:33 PM(UTC)
Rank: Member Groups: Registered Joined: 4/19/2009(UTC) Posts: 6		:D Just wanted you to know I stayed up late last night and I got the door together. It is so nice to be able to see through the glass. Thanks again Originally Posted by: Teresa Martin I was concentrating on the wrong end of the hinge. I think the parts are the retainer brackets. Thanks:D
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)