Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
GE XL44 Range
Options
Go to last post Go to first unread
Model: JGBP86CEB5CC Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
Gene  
#11 Posted : Tuesday, September 30, 2008 5:20:35 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Every CW orifice turn will decrease amount of gas, coming out of the orifice.

Gene.
Back to top
mercedes  
#12 Posted : Sunday, October 19, 2008 5:00:27 PM(UTC)
mercedes

Rank: Member

Groups: Registered
Joined: 10/19/2008(UTC)
Posts: 2
I have just purchased new house with no information on this range. The top burneres work fine, the oven stoped operating at any temperature but broil. The ignitior glows bright on broil only, as soon as you turn it to a spec temp, the flame goes out and the glow dies down. Is this a bad board, not sending voltage to ignitor , only sending voltage on the broil position?

thanks
sean
Back to top
Gene  
#13 Posted : Sunday, October 19, 2008 10:42:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Sean,

In order to provide most accurate advise we need the complete model number of the range. You can find it behind the bottom drawer.

Gene.
Back to top
mercedes  
#14 Posted : Tuesday, October 28, 2008 2:07:50 PM(UTC)
mercedes

Rank: Member

Groups: Registered
Joined: 10/19/2008(UTC)
Posts: 2
model number JGBP28BEA1WH Serial number HT213335P

Poss bad lower ignitor?

Thanks, Sean
Back to top
Gene  
#15 Posted : Tuesday, October 28, 2008 3:39:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sean,

Remove the bottom drawer, unplug the igniter wires and check the igniter for continuity. Check for 120VAC to the igniter while the control calls for Bake.

If the igniter is open or there is 120VAC to the igniter then the igniter is bad.

- The part number for the igniter is AP2014008

Gene.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
How do I replace the oven igniter on a GE XL44 Range? (Oven Repair (including Ranges and Cooktops))
by rwbarrett 12/20/2010 8:47:55 AM(UTC)
GE XL44 Range Wont reach target temp (Oven Repair (including Ranges and Cooktops))
by mdm6713@aol.com 12/14/2010 6:28:25 PM(UTC)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET