Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
rtmyerswv  
#1 Posted : Saturday, November 24, 2007 2:36:52 PM(UTC)
rtmyerswv

Rank: Member

Groups: Registered
Joined: 11/24/2007(UTC)
Posts: 1

The back of my dryer get's so hot that it is melting ahole in the back of the dryer and get's the wall too hot. It kicks the braker and I am afraid to use it. I am a single mother with 4 kids and would appreciate any help as to how to sole this problem.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jumptrout51  
#2 Posted : Sunday, November 25, 2007 5:24:10 AM(UTC)
jumptrout51

Rank: Advanced Member

Groups: Expert
Joined: 9/20/2007(UTC)
Posts: 21

Remove your vent on the back and check for a clogged vent tube either in the connecting hose and or the tube coming from the dryer.
Run the dryer for 1 cycle without the vent connected and see if it still gets too hot. If so, a bad limit switch could be causing your problem.
There should be a thermal fuse that will blow if the dryer is too hot. You may have had service at some point and the fuse was bypassed. NOT GOOD.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.