Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jerry8A  
#1 Posted : Saturday, March 28, 2009 1:18:36 PM(UTC)
Jerry8A

Rank: Member

Groups: Registered
Joined: 2/20/2009(UTC)
Posts: 14

Magnetron Heating Question –
Is there a “rule of thumb” method to check if a magnetron is losing its heating ability? I remember when a technician worked on my 1.6 cu. ft. micro. , he put in a glass of water and said it should heat in about a minute and a half. It seems to take about 2 minutes now. However, I am not sure the amount of water that was used by the tech.
Thanks,
Jerry
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
applianceman  
#2 Posted : Saturday, March 28, 2009 6:48:32 PM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648

I always use about a measured cup and as a rule of thumb it should be boiling in less than two minutes. Keep in that this will vary with each model depending on the wattage of the microwave. [URL="http://www.appliance-repair-it.com/microwave-repair.html"][/URL]
Jerry8A  
#3 Posted : Sunday, March 29, 2009 4:21:08 PM(UTC)
Jerry8A

Rank: Member

Groups: Registered
Joined: 2/20/2009(UTC)
Posts: 14

Thanks for the reply.

Jerry
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.