Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
hvach3-1, Check all infinite switches. Make sure the Black wire is connected to the "L1" terminals and the Red wire is connected to the "L2" terminal for all switches. Double check the wiring for the rocker switch. There are two pairs of contacts. Using an Ohmmeter, find which pair is closed in each position of the switch. Make sure that the black wire and two blue wires are connected to one (blower) pair and the two white wires and two brown wires are connected to another (oven light) pair. The picture attached. Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/26/2009(UTC) Posts: 7
|
It's a three wire setup. Thanks for all your time, but notice I junked this stove, no joke. Thanks again.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/26/2009(UTC) Posts: 7
|
Dumped the stove and purchased a 2 year old one. Removed the back cover, plugged in stove, checked voltage @ terminal block on stove, 220v L2 to N. Went to breaker panel and traced out N, It was just stuck on the screw, not tightened at all. Tightened up and all is well. Read correct voltage @ recepticle, I guess when a load was applied the N couldn't carry it and L1 back fed. I don't totaly understand it, but that's the low down. Thought it might help someone out in the future. Thanks again to those who tried to help me.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Thank you for letting us know.
Am always interested in the weird, pain in the rump problems and solutions. Can never tell when something like this will plague someone else.
By the way CONGRATS on finding it. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close