Rank: Member
Groups: Registered
Joined: 7/21/2011(UTC)
Posts: 2
|
Just replaced the control unit in my Bosch SHE46. It kinda works now, but instead of starting the countdown from 128 or 90 (like before), it now starts at 199 in all modes. Do I need to program this for my dishwasher? How do I do that? If I leave the door open and press any two buttons and turn the power on, I get a P0 on the display. I can press button #4 repeatedly and change the display up to P8 (I think, maybe P6). If I press button #5, the display changes to C6. I can press buttons #4 repeatedly and cycle this display from C0-C6 (or C8, maybe).
I don't know what any of that means, however. Can someone help?
Thanks in advance.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/21/2011(UTC)
Posts: 2
|
So after a few washes, the start time seems to have changed (it is now 108 minutes for a power scrubber plus). Are these washers smart enough to figure out when the dishes are clean? And then after a while it adjusts the start time to reflect a more true elapsed time? I just started a "regular" wash. Start time indicated 111, but it is not taking that long. It seems to be skipping ahead during the different parts of the wash. Is this thing really smart, or just haunted?
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
