Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
picklo  
#1 Posted : Saturday, July 30, 2011 12:31:09 PM(UTC)
picklo

Rank: Member

Groups: Registered
Joined: 7/30/2011(UTC)
Posts: 2

on my ge dryer the burner wont stay on.after selecting proper settings dryer starts ignitor glows red hot ,gas flows flame starts burns for 5 to 10 seconds flame shuts off. about 60 seconds later it repeats the same procedure. i replaced high limit termostat still same problem.high limit termostat opens when flame is on 5 to 10 seconds if i jump the high limit termostat flame stays on till i remove jumper.vents & air flow are clear.do you think the new termostat is bad or somthing else .any advise would be appreciated. THANKS
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
picklo  
#2 Posted : Sunday, July 31, 2011 5:39:10 AM(UTC)
picklo

Rank: Member

Groups: Registered
Joined: 7/30/2011(UTC)
Posts: 2

CONTACT ME AT JLEFF50740@AOL.COM
Users browsing this topic
Similar Topics
GE Dryer Not Heating - Model: GFDS140ED0WW (Dryer Repair)
by laflair13 3/1/2023 3:14:27 AM(UTC)
GE Dryer not heating up (Dryer Repair)
by Dryernoob 4/23/2020 10:55:51 AM(UTC)
Electric GE dryer not heating (Dryer Repair)
by spotox 1/1/2011 3:53:54 PM(UTC)
GE Dryer Not heating (Dryer Repair)
by jenada 12/3/2008 9:14:22 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.