Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
btatum  
#1 Posted : Sunday, July 24, 2011 8:59:57 AM(UTC)
btatum

Rank: Member

Groups: Registered
Joined: 7/24/2011(UTC)
Posts: 1

Our Frigidaire is approx. 7 years old. The problem was discovered by the water not dispensing from the ice/water dispenser located on the outside freezer door. I took the water filter off and tried again. Water was coming from where the filter is located and you can hear the pump running but no water from the door. While dealing with this I noticed the fridge or freezer was not cool. We pulled out the fridge and pulled off the back panel. The cooling fan was working but the compressor was hot and the coils were covered in dust. We cleaned everything and tried again, same thing, fan running, lights on inside, but no cool air coming out from inside fridge. I read through the previous threads and it looks like maybe the starter but would that also cause the water to not dispense?
I let the fridge sit for a few hours and then plugged it back in. You can hear the compressor come on, it hums, and the water is dispensing again. However, the fridge nor freezer side are getting cool.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Monday, July 25, 2011 4:55:54 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="DarkRed"]You can hear the compressor come on, it hums, and the water is dispensing again. However, the fridge nor freezer side are getting cool.[/COLOR]

Sounds like a sealed system problem.
As you say you can hear the compressor running also it should be warm and you should be able to feel it vibrating.
If this is the case and there is no frost or frost only in one area (usually where the freon enters the evaporator coils), you have a sealed system problem.
Be sure to check this after the compressor has run a couple hours because if you do it shortly after a defrost cycle there will not be any frost.

This will be an expensive repair as you need a pro and often there is no guarantee of a long term fix.

Usually it makes more sense to put those dollars towards a new unit.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.