Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
After running self cleaning, tempature controls do not work properly
Options
Go to last post Go to first unread
Model: RBS305PDQ6 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
shaxs  
#1 Posted : Tuesday, March 10, 2009 10:47:47 PM(UTC)
shaxs

Rank: Member

Groups: Registered
Joined: 3/10/2009(UTC)
Posts: 1
Hello All,

I am renting a house that has an in wall Whirlpool rbs305pdq6 oven. I ran the self clean two nights ago and shut off the self clean a hour prior to the end of it's countdown per my landlords instructions. Now the next day, the oven turns on, but if I try to press the up arrow to make the temperature hotter, the temp goes down instead on the digital control. If I press the down arrow, it goes down to set the oven at a lower temp. So, I can no longer press the up arrow button to set the temperature higher than the default degrees when you press bake. Any ideas?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
TechnicianBrian  
#2 Posted : Wednesday, March 11, 2009 5:39:28 AM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
Unfortunately, you have found a quirk in the control board (AP3009794) for these ovens that seems to show up after a self cleaning cycle is run. I have done at least 6 of these in the past and each one is exactly as you described. The problem is the boards are no longer available from most part houses so you may need to do some searching to get this one fixed.
Back to top
rhinoj  
#3 Posted : Wednesday, September 9, 2009 7:38:05 PM(UTC)
rhinoj

Rank: Member

Groups: Registered
Joined: 7/12/2009(UTC)
Posts: 2
I have the exact same issue with a RBS275PDB6 Whirlpool Oven. Is it the control panel #4451333 or the microcomputer #4452240? It may be a moot point because the control panel is virtually impossible to find. It is also about half the price of a new oven.

Thanks for your help.
Back to top
TechnicianBrian  
#4 Posted : Thursday, September 10, 2009 6:30:20 AM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
The problem is generally with the microcomputer which as you found out is going to be difficult to find. I have seen three of these and each was the control board. But in the case of two of them, the board was still easy to find. The third one turned into a new oven.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET