Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bobmeng  
#1 Posted : Thursday, March 5, 2009 10:37:57 AM(UTC)
bobmeng

Rank: Member

Groups: Registered
Joined: 3/5/2009(UTC)
Posts: 3

My roper does not agitate, What might be a common problem that I should look at to repair this.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
TechnicianBrian  
#2 Posted : Thursday, March 5, 2009 5:37:09 PM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769

Well if you hear the motor running, the coupler (AP3963893) is a logical failure as it provides drive to the gearbox. Of course the complaint will usually be the washer will not spin. The coupler is located under the washer and a failure usually leaves a calling card of little bits of rubber under the washer.
bobmeng  
#3 Posted : Thursday, March 5, 2009 6:33:08 PM(UTC)
bobmeng

Rank: Member

Groups: Registered
Joined: 3/5/2009(UTC)
Posts: 3

Thanks for the input and reference. I will be looking for that on Saturday and will let you know the results. There was no mention of not spinning, but don't know if it is or not. Is this a very difficult or time consuming part to replace?
bobmeng  
#4 Posted : Thursday, March 5, 2009 6:34:39 PM(UTC)
bobmeng

Rank: Member

Groups: Registered
Joined: 3/5/2009(UTC)
Posts: 3

the roper model # is RAS8245EQ21
TechnicianBrian  
#5 Posted : Thursday, March 5, 2009 6:53:37 PM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769

Not hard or time consuming at all. It's what I consider a DIY'er repair as anyone with basic tools and mechanical ability can do it themselves.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.