AppliancePartsPros.com
»
Appliance Repair Help
»
Washer Repair
»
Whirlpool Washer Not Agitating Draining - Please Help!
Rank: Member
Groups: Registered
Joined: 6/14/2011(UTC) Posts: 1
|
I am new to this forum so I hope I am giving the correct info. Basically, I am a single female and a home owner of 4 years that's handy but I only weigh aprox. 100 pounds so it's hard working with a washer. I have a Whirlpool washer; model#LSR8444LQ0, serial#CP3071477, type III.
Last night I put a medium load in the washer; on cold, delicate cycle and went to bed. I woke up to a washer full of soap, water, clothes and nasty water. It seems like it gets to the end of the wash cycle, makes a clicking sound, then just stops. That's it, its not agitating or draining. I tried restarting the load again in different ways and it stopped at the same place every time. I called Whirlpool and they asked me about my hoses (which I replaced all of my hoses 6 months ago). However, I guess I need pull out the washer to check for clogs in the drain hose and look for kinks. AS SOON as I can get someone to help me move the extremely heavy washer to check, that'll be great. However, after reading some of the posts, I am concerned it may be a larger problem and I CAN'T afford another problem. Seriously. I APPRECIATE ANY HELP FROM ANYONE!!!!!!!!!!!!
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Washer Repair
»
Whirlpool Washer Not Agitating Draining - Please Help!
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close