Rank: Member
Groups: Registered
Joined: 2/23/2009(UTC)
Posts: 6
|
After power break (they install new transformer in my complex) my Kenmore Elite 790 electric range has F5 00 or F5 01 codes. If I try "bake" I see F20 and Err.
Thank you
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Luda,
What is the complete model number of the range?
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/23/2009(UTC)
Posts: 6
|
Hi!
It is Kenmore Elite 790.9912.
Thank you very much.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
The model number you posted is incomplete. There suppose to be four more digits. Verify and repost it.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/23/2009(UTC)
Posts: 6
|
I found on manual, may be it is 790.9912 0406.
Thank you very much
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/23/2009(UTC)
Posts: 6
|
Kenmore Elite 30-Inch Freestanding Electric Range 96593. By the way the model was discontinued in July 2008.
Thank you
Luda
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/23/2009(UTC)
Posts: 6
|
One more try. 790.99123405.
Thank you very much
Luda
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Luda, According to the tech sheets for this model "F20" fault code means "Control has detected a problem with the communications link". The manufacturer suggested correction actions are: 1) Check the wiring between the controls. 2) If there is nothing wrong then replace the Electronic Oven Control. 3) If it would not solve the problem then replace the power board. Instructions are definitely not the best, but unfortunately we do not have any other. - The part number for the EOC is AP3790829 - The part number for the power board is AP3853452Here are the break down diagrams for the Kenmore range model 790.99123405 Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/23/2009(UTC)
Posts: 6
|
Thank you!
I have F5 for burners. F20 only for stove to bake.
Thank you again
Luda
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Luda,
In that case you have to replace both the EOC and the power boards. Possible the user interface board (#97A on the diagram) too. Could be very costly repair, but the range is very expensive too.
Keep us posted. Udachi!
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
