Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages<12
New Topic Post Reply
Options
Go to last post Go to first unread
Skramsim  
#11 Posted : Saturday, October 26, 2013 9:51:45 AM(UTC)
Quote
Skramsim

Rank: Member

Groups: Registered
Joined: 10/26/2013(UTC)
Posts: 1

I have read the post by rladasamIIi concerning the washer that won't spin. I have a Neptune TL top loader. Everything seems to work fine, it fills, washes, drains, starts and stops the spin cycle, and the door is locked the whole time. Only problem; it doesn't actually spin. The clothes are sopping wet even when set for max extract and even with a relatively small load of clothes.
Any suggestions? Is there a belt that could be broken or slipped?
Joe / APP Team  
#12 Posted : Monday, October 28, 2013 5:48:09 AM(UTC)
Quote
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Skramsim Go to Quoted Post
I have read the post by rladasamIIi concerning the washer that won't spin. I have a Neptune TL top loader. Everything seems to work fine, it fills, washes, drains, starts and stops the spin cycle, and the door is locked the whole time. Only problem; it doesn't actually spin. The clothes are sopping wet even when set for max extract and even with a relatively small load of clothes.
Any suggestions? Is there a belt that could be broken or slipped?


Skramsim, Like all top load washers, you need to check and make sure there are no articles stuck between the tubs, especially between the spin basket and tub cover.
Being a top load Neptune washer (FAV68 or 9800) the most common issue for no spin, or "DC" or "UL" error codes is a "slipping" clutch

Part number: AP4009131
Part number: AP4009131


It's an easy check. Raise the top panel of the washer, program the control for a spin/drain cycle. and observe the lifter paddles. When you press the start button, the tub should start to spin, and the lifters/paddles should not rotate more than half a revolution, if they continue to rotate , no matter how little or slowly, the clutch needs to be replaced.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Stacked Maytag/Neptune Washer not spinning (Washer Repair)
by Building and Grounds 10/24/2017 12:26:37 PM(UTC)
2 Pages<12
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.