Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Tuesday, July 24, 2007 5:18:32 PM(UTC)

Rank: Member

Groups: Registered
Joined: 7/24/2007(UTC)
Posts: 1

Recently bought a used upright freezer and noticed that the door seal is coming loose from the door a little and also from the freezer. When the door is first shut it seems to seal and then it come loose after a second or two. We are wondering if you have any advicefor this problem. I have read on line that you really need to replace the whole door and then other sites say you can replace the seal. We might as well have bought a new freezer for the cost to replace the door.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Tuesday, July 24, 2007 10:02:30 PM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

The first thing I would do check the door frame for the rust. If it's rusted just dump the freezer and buy a new one. If it looks good and you would like to replace the door gasket, the part number for the new one is AP2113453
For the references here is the break down diagram for the Frigidaire freezer Model FFU20F9GW3
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.