Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
boxermama  
#1 Posted : Friday, February 13, 2009 7:57:34 AM(UTC)
boxermama

Rank: Member

Groups: Registered
Joined: 2/13/2009(UTC)
Posts: 2

My two year old washer barely runs water in on any setting- We replaced the water valve hoping that was the problem with no change. Anyone got a suggestion?:eek: Thanks so much!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, February 13, 2009 8:22:55 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
My two year old washer barely runs water in on any setting

From the above I assume it is filling but is just very slow.
Is this correct?
Have you tried different temp settings? Perhaps only the cold or the hot is filling.

Did this machine run OK at this location in the past or are you in a new home?
The reason I ask is that many new homes have flood protection valves built into the plumbing, these can cause problems.

Disconnect the hoses from the machine and run into a pail.
Do you get good flow?
If YES
Disconnect the hoses from the taps and run.
Do you get good flow?
If YES
Then I am stumped

If NO
You may have a collapsed hose or some hoses have a screen filter built into the sealing washer which may be clogged up.
THIS FORUM IS DEAD!!!!!!!
boxermama  
#3 Posted : Friday, February 13, 2009 8:50:31 AM(UTC)
boxermama

Rank: Member

Groups: Registered
Joined: 2/13/2009(UTC)
Posts: 2

We are in the same home- Its 32 years old so no updates on the plumbing. We have tried different settings, with the same results- The water kind of spurts at intervals into the tub. We will try the hose trick tonight when we get home- I hope it works! thanks for your quick reply!!
Users browsing this topic
Guest (3)
Similar Topics
Very frustrated! (Oven Repair (including Ranges and Cooktops))
by nculver 1/23/2011 8:33:02 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.