Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jlouge  
#1 Posted : Tuesday, November 6, 2007 9:33:39 AM(UTC)
jlouge

Rank: Member

Groups: Registered
Joined: 11/6/2007(UTC)
Posts: 2

I have a whirlpool washer that would fill and wash, but, not spin and drain.
I replaced the pump and the coupling between the motor and the transmission. This did not help, then I noticed that the lid switch was damaged, so, I replaced it also. Now the washer fills with water but, then,
it stops. It won't do anything but make an occasional clicking noise. I thought about changing the timer switch, but, this is getting expensive
and I really don't know much about washer repair. Is there anyone whose
experienced this that can help me?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kooler  
#2 Posted : Friday, November 9, 2007 1:32:58 PM(UTC)
kooler

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/31/2007(UTC)
Posts: 214

My guess would lean more towards the drive motor switch... If I recall this motor spins one way to agitate and the other way to spin and pump out the water... AP3081302 is the P/N for the switch...
jlouge  
#3 Posted : Friday, November 9, 2007 1:37:55 PM(UTC)
jlouge

Rank: Member

Groups: Registered
Joined: 11/6/2007(UTC)
Posts: 2

Thanks. Your response is appreciated.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.