Kitchen Aid trash compactor won't raise - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kitchen Aid trash compactor won't raise Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

erics		#1 Posted : Monday, February 9, 2009 11:35:17 AM(UTC)
Rank: Member Groups: Registered Joined: 2/9/2009(UTC) Posts: 1		Kitchenaid model kucc151gss sticks down when using the "solid pack" compact button. When toggling this compact button off to "normal", we just hear a buzzing sound like the motor is stuck in the down/compacted position. We have then just turned the radial switch on the right side to "off" to save the motor. Is this a motor problem or possibly one of the switches? One more note: the compactor cycles down and up normally when just using the radial dial "start" "on" switch on the right. It just gets stuck in the lowest down position with the "solid pack" button engaged. Please help!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

aeharris		#2 Posted : Monday, January 17, 2011 8:56:13 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2011(UTC) Posts: 1		Originally Posted by: erics Kitchenaid model kucc151gss sticks down when using the "solid pack" compact button. When toggling this compact button off to "normal", we just hear a buzzing sound like the motor is stuck in the down/compacted position. We have then just turned the radial switch on the right side to "off" to save the motor. Is this a motor problem or possibly one of the switches? One more note: the compactor cycles down and up normally when just using the radial dial "start" "on" switch on the right. It just gets stuck in the lowest down position with the "solid pack" button engaged. Please help! I have the same problem, except that we can not use the radial switch either. The ram is in the down position.Removed the unit from the cabinet and looked to see if anything was jammed. Nothing is jammed, cannot move the ram on push in drawer to get the unit started again. Is this a problem with a cycle switch or the power drive.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close