Rank: Member
Groups: Registered
Joined: 3/24/2011(UTC)
Posts: 3
|
My Maytag Performa washer's spin speed is very slow till all water is evacuated. After water is emptied out the spin comes up to normal speed. The drive belt is relatively new. What's wrong?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: hank b  My Maytag Performa washer's spin speed is very slow till all water is evacuated. After water is emptied out the spin comes up to normal speed. The drive belt is relatively new. What's wrong? Hank, You need to check the motor carriage slides and springs, make sure the motor moves freely,and the base of the carriage is clean and well lubricated. With a relatively new belt, make sure the pump belt is properly adjusted(a 1/8 to 1/4 in. opening between the inner belt surfaces when "pinched" in the middle of the pump belt is the proper adjustment. Also check and make sure the motor pulley and transmission pulley(s) are clean and grease free. Good Luck, :) :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
