Whirlpool washer won't spin on the gentle knit cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool washer won't spin on the gentle knit cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LA6800XTW0	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

Bowdaddy		#1 Posted : Thursday, April 14, 2011 8:48:36 AM(UTC)
Rank: Member Groups: Registered Joined: 3/25/2011(UTC) Posts: 3		This is a top load washer. All cycles work except for the Gentle Knit cycle. In the Gentle Knit cycle, it will fill with water, sometimes it only agitates briefly, sometimes it will spin and sometimes it will not, and sometimes it will drain and sometime it will not. I have replaced the lid switch and bypassed the lid switch. Looked at the clutch and it seems fine. I am thinking the problem is either the dial timer or the motor since it is a 2 speed motor. How would I check these two items? Also if it is not these 2 items, what do you think it is? Read more: http://forum.appliancepartspros...cycle.html#ixzz1JW6eKbA8 http://forum.appliancepartspros.com


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Friday, April 15, 2011 4:32:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Your three choices are the motor, motor switch and the timer. Given the it works in the gentle cycle some of the time I am leaning towards the timer. You can disconnect the wiring and clean the contacts and if that does not fix things try a new timer. If you buy from this site and the part does not fix the problem you can return it, see the returns policy for details and conditions.


User Profile View All Posts by User View Thanks

Bowdaddy		#3 Posted : Tuesday, April 19, 2011 8:23:50 AM(UTC)
Rank: Member Groups: Registered Joined: 3/25/2011(UTC) Posts: 3		I think I got it fixed. I replaced the timer and so far so good. Thanks for all of your replies.


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Tuesday, April 19, 2011 12:44:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Great, good luck with it and thanks for the update.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close