Caloric Gas Even slow to Ignite & heat up - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Caloric Gas Even slow to Ignite & heat up Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RST376	Brand: Caloric	Age: More than 10 years
Previous Topic Next Topic

Dwbradley		#1 Posted : Friday, October 26, 2007 12:33:34 PM(UTC)
Rank: Member Groups: Registered Joined: 10/26/2007(UTC) Posts: 1		You can smell gas rather strong before the even ignites, and then it take 5 - 10 - 15 minutes or more before the Temp., starts to increase. I have no idea what componet needs replaced, if this is an igniter or gas value issue. The primary appliance replair shop does not service this brand. Any advice would be appreciated.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fixxit		#2 Posted : Friday, October 26, 2007 12:49:33 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/25/2007(UTC) Posts: 68		sounds like more than one issue. start by visualy checking the ignitor, look for a white or ashy spot. if so this is one likely problem. you might also check for a faulty gas valve (use a non-cumbustable light source) if the smell is Very strong use a leak detector (cheapest version of this is regular dish soap and water). look for the bubbles. may be just a loose gas connector. if not you may want to replace the gas valve


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Friday, October 26, 2007 1:00:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi Dwbradley Are we talking about bake or broil modes? If the problem is with the bake then most likely the igniter is bad and has to be replaced. If the problem is with broil then I would inspect the broil burner first for any size of holes in the net. Replace the burner if you found one. The igniter for the broil burner has to be replaced in any way. The igniters for the bake and for the broil are the same. You have to use the bracket from the old igniter. - The part number for the new igniter AP2934763 - The part number for the broil burner AP55224 - Here are the break down diagrams for the Caloric range Model RST376 Good luck. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close