Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mrnester@charter.net  
#1 Posted : Tuesday, October 23, 2007 3:17:31 PM(UTC)
mrnester@charter.net

Rank: Member

Groups: Registered
Joined: 10/23/2007(UTC)
Posts: 4

Turntable turns in fits and starts--does not seem to make a difference if the load is places on the outer parimater or in the center. The unit is slightly out of level--about 1/16 " front to back--Would this effect the operation?
The unit replaces a GE mounted identically as this one which operated without complaint for about 25 years.. any advice would really be appreciated--Thanks--Mel
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
derajm  
#2 Posted : Monday, December 22, 2008 5:30:53 AM(UTC)
derajm

Rank: Member

Groups: Registered
Joined: 12/22/2008(UTC)
Posts: 2

I have this same problem with my Kenmore 721.80803401. The experts report that the problem is the rotating central arm that drives the tray assembly. The Sears expert recommends replacing the ring assembly and tray assembly which is sold as a kit #383EW1A132A. A detailed picture of the arm shows that a wheel has been added which will probably stop the arm from disengaging from the slot in the glass tray. Since the part costs approximately $50 plus shipping, I am waiting for more feedback before making the purchase.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.