Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
yeller123  
#1 Posted : Tuesday, January 6, 2009 6:19:51 AM(UTC)
yeller123

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 2

I have a GE profile dual convection oven. After running the 4 hour self clean cycle on the top oven, the door won't unlock. Tried shutting the breaker off, running a partial clean cycle, etc. The locked light finally went off, however door still locked and when you try to turn oven on, you get the locked door error. Any sugestions on how to get it open?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Tuesday, January 6, 2009 8:04:48 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
In order to open the door you have to open the control panel and remove the door lock.

Remove the three screws from the bottom of the control panel. You'll heed a 1/4" open wrench. Pull the bottom of the control panel toward yourself and push it up to release from the upper tabs.

The door lock is secured by the three screws.

Gene.
yeller123  
#3 Posted : Saturday, January 31, 2009 7:06:43 AM(UTC)
yeller123

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 2

Thanks Gene. I replaced to door lock assembly and it is now working, except that the lock order is reversed, i.e. when self clean is started it goes to unlock mode and when self clean is shut off, the door locks. I tried shutting off the power during the self clean cycle, however when power is applied, it locks the door again. Any suggestions? Thanks
Gene  
#4 Posted : Saturday, January 31, 2009 9:39:24 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Looks like you switched around wires to the door latch switches. There suppose to be the tech sheets with the wiring diagram inside the control panel. Check which wire where goes.

Gene.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.