Soap Dispenser Coil Burned Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KUDJ02CRBS3	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

jyama99		#1 Posted : Wednesday, March 30, 2011 1:56:14 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2010(UTC) Posts: 59		Hi, I have a kitchen aid dishwasher that has a burnt coil. Should I replace the board also. I read somewere if the board is faulty it will burn the coil out again. If I need the board also what is the part #. Thanks Jerry
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Wednesday, March 30, 2011 6:13:32 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Jerry, The power to the dispenser coil operates by the triac in the control board and it's possible that it cause damage to the dispenser coil. So it would not hurt if you will replace the control board too. - The control board Part number: AP4309110 - The dispenser assembly Part number: AP4434598 Here are the breakdown diagrams and Replacement parts for WHIRLPOOL KUDJ02CRBS3 UNDERCOUNTER DISHWASHER | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

jyama99		#3 Posted : Wednesday, March 30, 2011 7:22:28 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2010(UTC) Posts: 59		Ok We'll do. Thanks
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, March 30, 2011 7:27:48 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. Keep us posted. Gene.
User Profile View All Posts by User View Thanks

jyama99		#5 Posted : Saturday, April 2, 2011 9:04:13 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2010(UTC) Posts: 59		Ok, Replaced dispenser and board. Soap dispenser opens now but dishwasher stays in wash cycle. It will wash, drain, then wash again over and over. Also the cancel button does nothing. There are some cockroach droppings in the panel area. The ribbon from the interconnect console to the board I replaced is discolored. I tried to swap back the old board and it has the same problem. What's Next? Test the ribbon? Thanks
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Monday, April 4, 2011 12:32:10 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Yes. Using a magnifying glass, check the ribbon cable tracks for a hairline cracks. Gene.
User Profile View All Posts by User View Thanks

jyama99		#7 Posted : Monday, April 4, 2011 6:30:05 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2010(UTC) Posts: 59		So, would that ribbon cause the dishwasher to keep running over and over? Can I test the ribbon with a meter, continuity test? Like I said also the ribbon internally is very discolored. Anything else would cause it to keep running? Thanks
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Monday, April 4, 2011 6:54:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The attached is the Tech sheet for this model. Gene. File Attachment(s): Tech Sheet - W10082651 - KUDJ02CRBS3.pdf (251kb) downloaded 20 time(s).
User Profile View All Posts by User View Thanks

jyama99		#9 Posted : Sunday, April 10, 2011 1:03:35 AM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2010(UTC) Posts: 59		Turned out to be the Ribbon. Working fine now. Thank You
User Profile View All Posts by User View Thanks

Gene		#10 Posted : Monday, April 11, 2011 5:06:16 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. I'm glad you were able to fix it. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)