Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
dishes not clean
Options
Go to last post Go to first unread
Model: MIELE G575 Brand: -other- Age: 5 - 10 years
Previous Topic Next Topic
feinerl  
#1 Posted : Sunday, October 21, 2007 6:29:03 PM(UTC)
feinerl

Rank: Member

Groups: Registered
Joined: 10/21/2007(UTC)
Posts: 9
I moved into a house with a miele g575 dishwasher. It advnace through all the cycle properly but food particles remain and are getting dryed on the the dishes and cutlery. I have checked the water inlet and the drain which both appear to be free of blockage? Any ideas? Is this a good unit?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Monday, October 22, 2007 1:42:18 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Is the water level up near the heating element, if so, open door while running and confirm washer spray arm is turning and spraying water all over. If not you have either a clogged pump or clogged spray arm.
If not full, drain washer and time the water fill, should be for more than 40 seconds.If not you have a bad timer or control module. If longer than 40 seconds and tub not full, you have a clogged screen in the water solenoid.
Back to top
feinerl  
#3 Posted : Monday, October 22, 2007 4:20:07 AM(UTC)
feinerl

Rank: Member

Groups: Registered
Joined: 10/21/2007(UTC)
Posts: 9
The water level is up to the element and I removed and checked the spray arms. How do I access those other areas to check them? Do I have to pull out the dishwasher?
Back to top
richappy  
#4 Posted : Monday, October 22, 2007 2:48:25 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Open the door whole washer is washing and check if spray arm is spraying and turning.
Back to top
feinerl  
#5 Posted : Monday, October 22, 2007 3:31:04 PM(UTC)
feinerl

Rank: Member

Groups: Registered
Joined: 10/21/2007(UTC)
Posts: 9
No It is not!. The water pouring out from the top of the unit is missing the funnel that directs it to the top spray arm. The bottom one is not turning either! They both turn freely when I spin them though. What is wrong?
Back to top
richappy  
#6 Posted : Monday, October 22, 2007 6:07:24 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Simply click on your model # above and order the missing funnel. Make sure the base that it threads into is ok. Some are left hand thread and some are right.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Dishes not clean, greasy film (Dishwasher Repair)
by spent enough already 5/30/2011 6:38:10 AM(UTC)
dishes not clean (Dishwasher Repair)
by wayne_h 2/24/2011 7:30:54 AM(UTC)
Dishes not Clean after washing (Dishwasher Repair)
by Kayo 12/15/2010 11:11:29 AM(UTC)
Dishes not Clean (Dishwasher Repair)
by Lyle McCumber 12/10/2010 3:46:31 PM(UTC)
dishes not clean anymore (Dishwasher Repair)
by mscerbak 3/7/2010 5:25:53 AM(UTC)
dishes not clean soap still in dw (Dishwasher Repair)
by danb_1 7/15/2009 1:56:37 PM(UTC)
Frigidaire dishes not clean (Dishwasher Repair)
by dlaudens 7/6/2009 6:42:01 AM(UTC)
Upper rack dishes not clean (Dishwasher Repair)
by Baxter 6/23/2009 1:10:53 PM(UTC)
Dishes not clean gritty black stuff left behind (Dishwasher Repair)
by meyergr 2/25/2009 8:22:08 AM(UTC)
stumped-dishes not clean (Dishwasher Repair)
by lcy 9/21/2008 8:43:57 PM(UTC)
Dishes not cleaned (Dishwasher Repair)
by Dreiding 9/8/2008 5:56:43 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET