Rank: Member
Groups: Registered
Joined: 3/6/2011(UTC)
Posts: 1
|
When my Ice Maker fills with water, the valve does not shut off resulting in water filling up the ice tray, bin, down to the bottom of the freezer and out the door when it's opened. It is a continuous flow. Can this be fixed with a new water inlet valve (AP3160649) or is it a different problem? Ice maker has worked for 7 years prior.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: C Keller  When my Ice Maker fills with water, the valve does not shut off resulting in water filling up the ice tray, bin, down to the bottom of the freezer and out the door when it's opened. It is a continuous flow. Can this be fixed with a new water inlet valve (AP3160649) or is it a different problem? Ice maker has worked for 7 years prior. C, You're most likely correct in your diagnosis, You probably have a sticky water valve solenoid/diaphram(more likely than a bad ice maker fill contact). Part number: AP3160649
Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
