Microwave Dead in the Water - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Microwave Dead in the Water Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MCO165UW	Brand: Magic Chef	Age: Less than 1 year
Previous Topic Next Topic

pmaldrum		#1 Posted : Thursday, February 17, 2011 9:41:13 AM(UTC)
Rank: Member Groups: Registered Joined: 9/24/2009(UTC) Posts: 8		My microwave is dead in the water, made popcorn last night, shut it off after popcorn was done, and woke up this morning to a dead microwave. Have checked voltage to the upper microswitch in door, also to main power board at the top next to magnetron (also checked the fuse...20A/220v ceramic)... all good... have not totally taken it off the wall yet... any clues would be appreciated :D


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Jeff / APP Team		#2 Posted : Thursday, February 17, 2011 10:56:29 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		Need a correct model number for this. Check the cavity thermal fuse on the top of the unit and see if it is blown. If so with a correct model I can give you the part number for it. Thanks.


User Profile View All Posts by User View Thanks

pmaldrum		#3 Posted : Thursday, February 17, 2011 1:30:37 PM(UTC)
Rank: Member Groups: Registered Joined: 9/24/2009(UTC) Posts: 8		Thanks for replying, the model#MCO165UW, it's made by Hogar How do I get to the fuse you are talking about...:D


User Profile View All Posts by User View Thanks

Jeff / APP Team		#4 Posted : Friday, February 18, 2011 4:21:56 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		You will need to remove the outer cover to get to the fuse.


User Profile View All Posts by User View Thanks

pmaldrum		#5 Posted : Friday, February 18, 2011 8:54:26 AM(UTC)
Rank: Member Groups: Registered Joined: 9/24/2009(UTC) Posts: 8		I took the cover off and started to check things out, I found that the Thermal Cutout attached to the magnetron, was supposed to be normally closed and it was open... So, I need to get that part, as when I bypassed it, everything worked... it's funny how just making a bag of popcorn could've blown that thermal cutout... but I have it bypassed for now till I get the part then will pull all apart again to replace it... the number on the cutout is an NT-101...will have to look it up. Thanks again for all your help... you guys are great!! Peter


User Profile View All Posts by User View Thanks

Jeff / APP Team		#6 Posted : Friday, February 18, 2011 9:19:20 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		I would not advise running it bypassed. Here is the part number for what you need. Glad we could help! Part number: AP4564949


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close