Rank: Member
Groups: Registered
Joined: 10/25/2007(UTC)
Posts: 14
|
I think I may already know the answer, but, am I wasting my time and money trying to replace 3 of the 4 burners and recepticles on a Kenmore freestanding elect. range purchased in 1995? 1 or 2 burner recepticles and a relay(?) or resistor(?) was replaced under warranty when it was sort of new, and they started to go again a few yrs later. One recepticle even exploded. Yes, my wife used to unplug and plug in the burners too often for cleaning. There is a little bit of rust/hole under 2 of the burners. Should I assume it won't be cost effective? Thanks.
UPDATE
I found the model #
911.9334190
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
Yes I think it may be at the end of it's life.
I looked at the Sears parts site.
The elements will rum you about $30.00 each.
If you need new clips that hold the element receptacles they are about $3.00 each.
The problem is the receptacles.
They show a wiring harness with ballcocks (I think this is a typo and it should be blocks) but it does not look like it is available.
They also show a terminal block at about $40.00 each but it looks like this is just the connectors and does not include the ceramic blocks.
Probably time to replace the unit. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/25/2007(UTC)
Posts: 14
|
Thanks. I saw those parts also and was equally confused. I see you have a generic recepticle kit, Part Number: AP3075808, since it says for 'most' stoves, mine probably isn't included?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
[COLOR="DarkGreen"]I see you have a generic recepticle kit,[/COLOR]
It would be best that you call the parts people perhaps they can help.
I do not work for AppliancePartsPros, I just volunteer here in an attempt to help a few DIYers. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
