Whirlpool Gold Accubake Oven won't attain temperature - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool Gold Accubake Oven won't attain temperature Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GR450LXHQ2	Brand: -brand-	Age: 5 - 10 years
Previous Topic Next Topic

sandy1951		#1 Posted : Friday, January 7, 2011 7:46:50 PM(UTC)
Rank: Member Groups: Registered Joined: 1/4/2011(UTC) Posts: 3		I hope there is some kind soul who can help me. I have a whirlpool gold accubake oven that will not get up to temperature. I replaced the oven sensor hoping that would solve the problem but it is still doing this. The Broil element goes on and off, as per the accubake, the bake element glows during preheat but does not come on after that. So the main source of heat for the oven is the broil element. What can I check, what part do I need. I am becoming very frustrated with the whole thing. Thank you in advance Sandy


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Saturday, January 8, 2011 1:55:18 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL GR450LXHQ2 30`` ELECTRIC RANGE CERAN COOKTOP Convection Oven \| AppliancePartsPros.com Here is a service manual which may help but it does cover a number of units https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/5feedbe46138625985256aa1005ef62c/$FILE/8178042.pdf Here is the tech sheet, see the attachment. Sorry but I find your post a little confusing you say "oven that will not get up to temperature" but then say "the bake element glows during preheat but does not come on after that" which sort of indicates that it does come out of preheat and therefore is reaching set point temperature. There also seems to be a discrepancy in the manual where it talks about 2 sensors but the wiring diagram and parts only show one. This may just be because the manual is talking about another unit that is covered by it. When the element do come on do they get a fairly consistent red in color? Could be one of them is shorting through it's foot to the frame. If the elements look OK then I would say that the control board is the cause of your problems. File Attachment(s): GR450.pdf (319kb) downloaded 36 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

sandy1951		#3 Posted : Saturday, January 8, 2011 4:59:24 AM(UTC)
Rank: Member Groups: Registered Joined: 1/4/2011(UTC) Posts: 3		Thank you so much for your reply. I'm sorry to be confusing. When you turn the oven on, the bake element glows for a period of time then goes off and never comes on again. I have checked the temperature at the time the preheat cycle is over and the temperature in the oven is 250 degrees, not 350. After that, it seems the heat is maintained by the broil element only. I have to turn it up to 500 degrees to get near 350. I have looked on the internet and have seen the control board mentioned but can't seem to find it on the schematic drawings. Do you know the part #? Sandy


User Profile View All Posts by User View Thanks

denman		#4 Posted : Saturday, January 8, 2011 6:30:56 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		The control board is Item 15 in Section 2 in the parts link. The part number depends on the color.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

sandy1951		#5 Posted : Saturday, January 8, 2011 8:43:45 AM(UTC)
Rank: Member Groups: Registered Joined: 1/4/2011(UTC) Posts: 3		Thanks for the quick reply- wow, with the cost of the part, I guess I'll just buy a different stove. Oh well, I like gas better anyway. Thanks though for trying.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close