Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
doityourselfer  
#1 Posted : Thursday, October 4, 2007 3:45:49 PM(UTC)
doityourselfer

Rank: Member

Groups: Registered
Joined: 10/4/2007(UTC)
Posts: 16

Side by side, freezer working great, the frig is too warm (60deg). The damper automatically closes when the power is turned on so I replaced the control board assembly. Still have the same problem $155 later. Do I try another part (such as the air diffuser assembly or even the thermistor)? I hate to keep buying parts unless I can get better guidance.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Friday, October 5, 2007 3:19:56 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Check your model # it will not work
doityourselfer  
#3 Posted : Monday, October 8, 2007 6:43:09 AM(UTC)
doityourselfer

Rank: Member

Groups: Registered
Joined: 10/4/2007(UTC)
Posts: 16

What do you mean? The part will not work with the part I installed? The model is 106.52603100. The part number is 8201528.
richappy  
#4 Posted : Tuesday, October 9, 2007 12:49:18 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You have a Whirlpool fridg. They always have the service sheet tucked under the front kick panel. Remove and check the thermistors for proper resistance.If off value just replace. While waiting for parts, unplug your damper motor and jam open 1/2 way the damper door.
doityourselfer  
#5 Posted : Thursday, October 11, 2007 1:04:30 PM(UTC)
doityourselfer

Rank: Member

Groups: Registered
Joined: 10/4/2007(UTC)
Posts: 16

I have checked the service sheet as you suggested and ran the suggested diagnostics routine (I am assuming that is what you referred to with "check the thermistors for proper resistance) but they "passed". Any other ideas? What parts are you referring to "while waiting for parts"?
richappy  
#6 Posted : Thursday, October 11, 2007 4:12:07 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Your problem is impossible for me to figure out. Just order the thermistors, most probable problem even though they tested ok.
Users browsing this topic
Guest (2)
Similar Topics
After power outage, refrig too warm, freezer OK (Refrigerator & Freezer Repair)
by zzdodge 12/24/2013 5:51:12 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.