Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
verifying a faulty ignitor
Options
Go to last post Go to first unread
Model: 3121XTW-W Brand: Magic Chef Age: More than 10 years
Previous Topic Next Topic
mcshifter  
#1 Posted : Saturday, November 22, 2008 11:50:10 AM(UTC)
mcshifter

Rank: Member

Groups: Registered
Joined: 11/22/2008(UTC)
Posts: 1
ok here it goes:)
i replaced this ignitor about 5 or 6 years ago. all of my top burners light up just fine. i use a digital ohm meter on the pigtail for the flat blade ignitor and get an ofl reading. i think that i should get some sort of reading but not totaly sure about it so here i am.
please help with any info possible.
thanks alot.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Saturday, November 22, 2008 12:23:36 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
This may help a little.

The ignitor is glowing brightly however
the amp draw from this ignitor is only 2.79 amps

and may not open the gas safety valve properly

 Part Details - MAYTAG Oven / broiler igniter kit, flat style, part number: 12400035

Nat
Back to top
kayakcrzy  
#3 Posted : Sunday, November 23, 2008 4:37:02 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Replace ignitor. Tom ApplianceEducator.com
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET