Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Your tranny is not supposed to spin while agitating. This will bunch up the clothes resulting in the unbalanced condition. Probably need a new tranny.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/28/2008(UTC)
Posts: 4
|
Replace the break pads. there is 3 of them and they come in a kit with new bolts.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Great advice and I think you can lift the whole tranny with a pry bar and shims without pulling off the springs.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/22/2008(UTC)
Posts: 8
|
AaronG and richappy,
Thanks for the advice. I'll probably order new springs and a break kit but not for some time. The wife reached her limit and I bought her a new washer. I'm keeping this one for now and will make these repairs in the near future.
Thanks all for the assistance. I'll post the results in a few weeks when I can get back to this.
Ciao,
Joe
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
