Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
seijojoe  
#1 Posted : Tuesday, December 21, 2010 10:08:09 AM(UTC)
seijojoe

Rank: Member

Groups: Registered
Joined: 10/18/2010(UTC)
Posts: 3

I recently had to replace the wires coming off the oven control valve in the back of the range because we had a fire over Thanksgiving (my wife poked a hole in the aluminum pan containing the turkey). Everything works fine now, but there's a gas smell in the oven when the oven is off. Could the fire have damaged the oven control valve? As far as I can tell, all the gas connections up to the valve are not leaking. Joe
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
magician59  
#2 Posted : Tuesday, December 21, 2010 10:15:39 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273

You really oughta have that checked by a pro. Gas is something you don't want to mess with.
seijojoe  
#3 Posted : Tuesday, December 21, 2010 10:24:17 AM(UTC)
seijojoe

Rank: Member

Groups: Registered
Joined: 10/18/2010(UTC)
Posts: 3

Originally Posted by: magician59 Go to Quoted Post
You really oughta have that checked by a pro. Gas is something you don't want to mess with.


I've already sunk about $500 into this old stove, including two different repair companies that incorrectly diagnosed an earlier problem and installed parts unnecessarily. All I'm looking for here is an answer to whether or not the oven control valve is susceptible to heat (i.e. fire damage). Do you know anyone who is an expert in this area? Joe
magician59  
#4 Posted : Tuesday, December 21, 2010 10:32:45 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273

The gas lines are aluminum. The only knowledge of the extent of the fire you had is by your desription. The valves themselves probably weren't damaged, but the connections and the lines need to be leak tested.
seijojoe  
#5 Posted : Tuesday, December 21, 2010 10:50:52 AM(UTC)
seijojoe

Rank: Member

Groups: Registered
Joined: 10/18/2010(UTC)
Posts: 3

Originally Posted by: magician59 Go to Quoted Post
The gas lines are aluminum. The only knowledge of the extent of the fire you had is by your desription. The valves themselves probably weren't damaged, but the connections and the lines need to be leak tested.


Thanks. I'll go back and double check all the connections. Joe
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.