Oven Door Hinge Replacement - Christmas 5 days away! - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Oven Door Hinge Replacement - Christmas 5 days away! Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JTP14W0T1WW	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

DDoukas		#1 Posted : Sunday, December 19, 2010 4:24:23 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2010(UTC) Posts: 2		I have a wall mount oven and the right side oven door hinge looks to be "torn" and needs replacement. I need detailed instructions on how to replace for GE model JTP14W0T1WW. Can I use the right hinge for model JTP14WT1WW.... I can't find my exact model number on the parts listing?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Sunday, December 19, 2010 5:05:52 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Open door to first stop and lift door off by firmly grasping on each side and pulling straight up. Be carefunl not to let the hinge arms snap back on your fingers. 1. Remove four screws mounting oven in wall and slide forward approximately 6". Take necessary precautions to insure that oven dose not slip forward. 2. Remove the 2 lower side trim screws and the two screws that mount the hinge to the front frame. 3. Grasp the hinge from the rear and rotate bottom of hinge towards the rear of the oven and while guiding the hinge arm through the slot in the front frame. 4. Reinstall in reverse order. Note:Make sure hinge arms are parallel with each other and perpendicular to front frame. (If not this may cause the hinge to bind on the receiving channel of the door.) - The right side door hinge Part number: AP2630839 Here are the breakdown diagrams and Replacement parts for General Electric JTP14WT1WW Electric range \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

DDoukas		#3 Posted : Monday, December 20, 2010 5:08:50 AM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2010(UTC) Posts: 2		Thanks for the quick response! I'm going to give it a try.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, December 20, 2010 11:09:19 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. Keep us posted. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close